Chuyển đến nội dung chính

Hướng Dẫn Quét Mạng Nmap: Lesson 3 Use ZENMAP and NMAP on BackTrack 5

{ Use ZENMAP and NMAP on BackTrack 5 R }
Section 0. Background Information
  1. NMAP
    • Nmap (Network Mapper) is a security scanner used to discover hosts and services on a computer network, thus creating a "map" of the network. To accomplish its goal, Nmap sends specially crafted packets to the target host and then analyzes the responses. Unlike many simple port scanners that just send packets at some predefined constant rate, Nmap accounts for the network conditions (latency fluctuations, network congestion, the target interference with the scan) during the run
     
  2. Pre-Requisite
    • BackTrack: Lesson 1: Installing BackTrack 5 
  3. Lab Notes
    • In this lab we will do the following:
      1. Use Zenmap to conduct a quick, intense and network scan.
      2. Use Nmap to conduct a quick and intense scan.
  4. Legal Disclaimer - Đào Tạo An Ninh Mạng Www.AnToanThongTin.Edu.Vn

Section 1. Login to BackTrack
  1. Start Up VMWare Player
    • Instructions:
      1. Click the Start Button
      2. Type Vmplayer in the search box
      3. Click on Vmplayer
  2. Open a Virtual Machine
    • Instructions:
      1. Click on Open a Virtual Machine
  3. Open the BackTrack5R1 VM
    • Instructions:
      1. Navigate to where the BackTrack5R1 VM is located
      2. Click on on the BackTrack5R1 VM
      3. Click on the Open Button
  4. Edit the BackTrack5R1 VM
    • Instructions:
      1. Select BackTrack5R1 VM
      2. Click Edit virtual machine settings
  5. Edit Virtual Machine Settings
    • Instructions:
      1. Click on Network Adapter
      2. Click on the Bridged Radio button
      3. Click on the OK Button
  6. Play the BackTrack5R1 VM
    • Instructions:
      1. Click on the BackTrack5R1 VM
      2. Click on Play virtual machine
  7. Login to BackTrack
    • Instructions:
      1. Login: root
      2. Password: toor or <whatever you changed it to>.
  8. Bring up the GNOME
    • Instructions:
      1. Type startx
Section 2. Bring up a console terminal
  1. Start up a terminal window
    • Instructions:
      1. Click on the Terminal Window
  2. Obtain the IP Address
    • Instructions:
      1. ifconfig -a
    • Note(FYI):
      • My IP address 192.168.1.111.
      • In your case, it will probably be different.
Section 3. Log into Damn Vulnerable WXP-SP2
  1. Start Up Damn Vulnerable WXP-SP2.
    • Instructions:
      1. Click on Damn Vulnerable WXP-SP2
      2. Click on Edit virtual machine Settings
    • Note(FYI):
      • For those of you not part of my class, this is a Windows XP machine running SP2.
     
  2. Edit Virtual Machine Settings
    • Instructions:
      1. Click on Network Adapter
      2. Click on the Bridged Radio button
      3. Click on the OK Button
     
  3. Play Virtual Machine
    • Instructions:
      1. Click on Damn Vulnerable WXP-SP2
      2. Click on Play virtual machine
     
  4. Logging into Damn Vulnerable WXP-SP2.
    • Instructions:
      1. Username: administrator
      2. Password: Use the Class Password or whatever you set it.
     
  5. Open a Command Prompt
    • Instructions:
      1. Start --> All Programs --> Accessories --> Command Prompt
     
  6. Obtain Damn Vulnerable WXP-SP2's IP Address
    • Instructions:
      1. ipconfig
    • Note(FYI):
      • In my case, Damn Vulnerable WXP-SP2's IP Address 192.168.1.110.
      • This is the IP Address of the Victim Machine that will be scanned by NMAP.
      • Record your Damn Vulnerable WXP-SP2's IP Address.
      • See the below picture to calculate your subnet mask.

Section 5. Perform Zenmap Quick Scan
  1. Start Zenmap
    • Note(FYI):
      • Make sure you are on the BackTrack5R1 VM Machine
    • Instructions:
      1. zenmap
     
  2. Perform a quick scan by doing the following: (See Below). 
    • Note(FYI):
      • Replace 192.168.1.110 with Damn Vulnerable WXP-SP2's IP Address obtained from (Section 3, Step 6).
    • Instructions:
      1. Target: 192.168.1.110
      2. Profile:  Select Quick Scan
      3. Click the Scan Button.
     
  3. Output Analysis
    • Notes(FYI):
      1. Nmap's quick scan displays the following basic network metrics:
        • If the host is up.
        • How many ports are closed.
        • Which ports are open and their service name.
          • e.g., 21 (ftp)
        • Also, the MAC address is display with Nmap's guess of the OS being VMware.
     
Section 6. Zenmap Intense Scan
  1. Perform Intense Scan
    • Note(FYI):
      • Replace 192.168.1.110 with Damn Vulnerable WXP-SP2 IP Address obtained from (Section 3, Step 6).
    • Instructions:
      1. Target: 192.168.1.110
      2. Profile:  Select Intense Scan
      3. Click the Scan Button. 
     
  2. Version Analysis
    • Notes(FYI):
      1. Notice the results are more verbose.
      2. The actual version of the service was added to service name.
        • You can use this information to investigate possible exploits.
        • For Example, Microsofts ISS http 5.1 webserver.

Section 7. Nmap Network Scan
  1.   Subnet Ping Scan
    • Note(FYI):
      • Obtained the subnet mask of your Damn Vulnerable WXP-SP2 from (Section 3, Step 6).
    • Instructions:
      1. Change Target to the subnet address of Damn Vulnerable WXP-SP2.
        • In my case, 192.168.1.0/24
        • Notice, that I replaced the last octet of my IP address with a 0.
        • The /24 represents the subnet mask.
      2. Change Profile to: Ping Scan
      3. Click Scan
  2. Topology Analysis
    • Instructions:
      1. Click on the Topology Tab.
      2. Click on Fisheye
      3. Click on Controls
        • This will allow you to increase the size of the network rings.
      4. Click on the Zoom Arrow
    • Note(FYI):
      • This will give you a visual representation of how your network is laid out.
      • When presenting a customer or management with a penetration testing analysis, this would be a good picture to throw into the report
Section 8. Performing NMAP Scans
  1. Perform Quick NMAP Scan
    • Instructions(FYI):
      • Replace 192.168.1.110 with Damn Vulnerable WXP-SP2 IP Address obtained from (Section 3, Step 6)
    • Instructions:
      1. nmap -T4-F 192.168.1.110 | tee /var/tmp/nmap.quick.txt
        • nmap - is the NMAP scanner.
        • | tee /var/tmp/nmap.quick.txt - View output and sent it to file nmap.quick.txt.
  2. Perform Intense NMAP Scan
    • Instructions(FYI):
      • Replace 192.168.1.110 with Damn Vulnerable WXP-SP2 IP Address obtained from (Section 3, Step 6)
    • Instructions:
      1. nmap -p 1-65535 -T4 -A -v 192.168.1.110 | tee /var/tmp/nmap.intense.txt
        • nmap - is the NMAP scanner.
        • | tee /var/tmp/nmap.intense.txt - View output and sent it to file nmap.intense.txt.

Section 9. Proof of Lab
  1. Proof of Lab
    • Proof Of Lab Instructions:
      1. Do a PrtScn of the below commands
      2. Paste into a word document
      3. Upload to website Www.AnToanThongTin.Edu.Vn
    • Instructions
      1. ls -l /var/tmp/nmap*
      2. date
      3. echo "Your Name"
        • Put in your actual name in place of "Your Name"
        • e.g., echo "John Gray"
Nhãn:

Bài đăng phổ biến từ blog này

Hack the Gibson VM (CTF Challenge)

It’s a boot2root challenge and it does not get over with getting root access. You have to find flag also. So let’s start. First of all download lab from https://download.vulnhub.com/gibson/gibson.ova Now open kali terminal and like always start with first step i.e. netdiscover netdiscover it shows all the hosts those are up in our network and from here we get our target ip. Target IP: 192.168.1.6 As our target is all set we are going to scan it with nmap which will show all the open ports. In this case open ports are only two i.e. 22 and 80. nmap –p- -A 192.168.1.6 As from the above result we have got 80 port open so we will open target ip in browser. It shows an accessible directory. Let’s try opening it as we cannot see anything important here. Oh no such luck with this also. It’s written the result will be found by brute force but there is no place where we can apply brute force. As we do not have any other option so let’s just go to view page source to see if we could get a...
Đọc thêm

Penetration Testing in PwnLab (CTF Challenge)

In this article we will walkthrough a root2boot penetration testing challenge i.e PwnLab. PwbLab is a vulnerbale framework, based on the concept of CTF (capture the flag), with a bit of security which is a little complicated to bypass. But it’s not impossible. So, let us learn how we can get its access. Download From Here Now to start let us, firstly, consider that we do not know the IP of the PwnLab, therefore search for the IP address before hand and for that there is a command that shows us all the IP’s present in our network, so go to the terminal of you Kali and type : netdiscover Target IP = 192.168.0.105 And to know that we start our penetration testing. So, first, we will now scan with nmap , we will apply an aggressive scan as it gives detailed information and is fast. The command is : nmap -A 192.168.0.105 We have the result of scanning and as you can see there are only three ports open and they are: 80, 111, 3306. Our target IP is 192.168.0.105 as its MAC Vendor is...
Đọc thêm

Hack the Pentester Lab: from SQL injection to Shell II (Blind SQL Injection)

Today we are going to perform penetration testing with part II of previous lab, download it from  here . Now install the iso image in VM ware and start it. In this lab task level is intermediate and challenge is to gain access of administration console and then upload a PHP webshell. Start Kali Linux then open the terminal and  type netdiscover  command for scanning network. Here  192.168.1.102  is my target IP which is shown in the screenshot. Now explore this IP in browser. When you will open target IP in browser you will get a web page having heading My Awesome Photoblog . On the top of left side it contains some tags: home; test; ruxcon; 2010; all pictures; admin. Now  Click  on  test . The given URL : http://192.168.1.102/cat.php?id=1  will run sql query for  ID 1  now let try to find out whether the above URL is vulnerable to sql injection or not by adding( ‘) apostrophe at last of URL: http://192.168.1.102/cat.p...
Đọc thêm