Wifi Hacking with Evil Twin Attack using Linset

Note: For “Evil Twin Attack” , we are using Linset Tool in WiFiSlax operating system.

Wifislax is an open source Linux operating system based and inspired by the Slackware Linux distribution. It’s main goal is to support the latest Wi-Fi technologies. The system provides out-of-the-box support for a wide range of wireless and wired network cards. In addition, it contains a large number of security and forensics tools, which transforms it into a pentesting (penetration testing) distro.

Open the wifislax terminal and type linset

Press 1 for wlan0 and go to the next screen

Now press 1 to scan all channels.

Now Scan Wireless Networks once press 1, it will show you all available wifi connection you can press Ctrl + C to cancel scanning

Now select target of the attack in my case I am selecting 7 Tenda_2 a window will appear like this:

Now choose the first option (hostapd) press 1 to select it and move to the next screen.

Now press enter to continue

Now select the type of check Handshake choose option 1.

There are several options for making Handshake on WPA / WPA2 targets, you can choose the number whatever, and I choose the number 1

Now it will disconnect all clients and capture the handshake, you will get a new window and you have to wait about 1 minute until you of the handshake.

Now choose option 1 and press enter

Now Select Web Interface press 1 to select the neutral web interface.

Finally we will choose the language choose option 1 for english.

After that there will be a process of making the Access Point False with the same name, so client “tenda_2” will have problems in connection and at the same time cannot be connected with Accesss Point ”tenda_2“.

So the client will check the Wi-Fi connection and will connect to the Access Point”tenda_2″ are false,

Once connected sure the client will open Browser them to perform online activity and after the browser client is open there will be Login Page or a place to enter a password Wi-Fi.

When victim enter the password you can get wifi password in clear text. You can see this in the following screenshot:

Bài đăng phổ biến từ blog này

Hack the Gibson VM (CTF Challenge)

It’s a boot2root challenge and it does not get over with getting root access. You have to find flag also. So let’s start. First of all download lab from https://download.vulnhub.com/gibson/gibson.ova Now open kali terminal and like always start with first step i.e. netdiscover netdiscover it shows all the hosts those are up in our network and from here we get our target ip. Target IP: 192.168.1.6 As our target is all set we are going to scan it with nmap which will show all the open ports. In this case open ports are only two i.e. 22 and 80. nmap –p- -A 192.168.1.6 As from the above result we have got 80 port open so we will open target ip in browser. It shows an accessible directory. Let’s try opening it as we cannot see anything important here. Oh no such luck with this also. It’s written the result will be found by brute force but there is no place where we can apply brute force. As we do not have any other option so let’s just go to view page source to see if we could get a...

Đọc thêm

Penetration Testing in PwnLab (CTF Challenge)

In this article we will walkthrough a root2boot penetration testing challenge i.e PwnLab. PwbLab is a vulnerbale framework, based on the concept of CTF (capture the flag), with a bit of security which is a little complicated to bypass. But it’s not impossible. So, let us learn how we can get its access. Download From Here Now to start let us, firstly, consider that we do not know the IP of the PwnLab, therefore search for the IP address before hand and for that there is a command that shows us all the IP’s present in our network, so go to the terminal of you Kali and type : netdiscover Target IP = 192.168.0.105 And to know that we start our penetration testing. So, first, we will now scan with nmap , we will apply an aggressive scan as it gives detailed information and is fast. The command is : nmap -A 192.168.0.105 We have the result of scanning and as you can see there are only three ports open and they are: 80, 111, 3306. Our target IP is 192.168.0.105 as its MAC Vendor is...

Đọc thêm

Hack the Pentester Lab: from SQL injection to Shell II (Blind SQL Injection)

Today we are going to perform penetration testing with part II of previous lab, download it from here . Now install the iso image in VM ware and start it. In this lab task level is intermediate and challenge is to gain access of administration console and then upload a PHP webshell. Start Kali Linux then open the terminal and type netdiscover command for scanning network. Here 192.168.1.102 is my target IP which is shown in the screenshot. Now explore this IP in browser. When you will open target IP in browser you will get a web page having heading My Awesome Photoblog . On the top of left side it contains some tags: home; test; ruxcon; 2010; all pictures; admin. Now Click on test . The given URL : http://192.168.1.102/cat.php?id=1 will run sql query for ID 1 now let try to find out whether the above URL is vulnerable to sql injection or not by adding( ‘) apostrophe at last of URL: http://192.168.1.102/cat.p...

Đọc thêm

Security lab

Tìm kiếm Blog này